Tiếng Việt
The Cubicon low-cost 3D printer is imported from South Korea. It is made by the HyVISION group, and we are its exclusive distributor in Vietnam. It was improved and developed from the Cubicon Single 2015. The Cubicon Single Plus 2016 keeps the great features of the Cubicon Single and adds many new ones that make life easier for users. Thanks to these features, and especially its industrial yet elegant and eye-catching black-and-white design, it is the hottest low-cost 3D printer on the market.
Key features
Print head is easy to remove and handle.
100% automatic bed leveling with a CAM mechanism.
Saves 80% of the time spent calibrating the bed and preparing the machine before it can start. Very few low-cost 3D printers on the market have this great feature.Heated print bed
It gives much better bed adhesion. The Cubicon Single Plus can print 3 types of plastic: PLA, ABS and TPU (flexible). This also sets Cubicon apart from other low-cost 3D printers.- Cuts bed detachment during printing, which ruins parts, by up to 95% compared with ordinary 3D printers.
Enclosed build chamber with Nano odor filter
Among all low-cost 3D printers, only Cubicon has this feature. The chamber temperature is kept at 50-60°C with constant heat convection:- Users are fully protected and not exposed to fumes from melting plastic.
- 3D printing becomes much easier. Users often struggle with ABS and TPU (flexible) plastic, but now they can relax, because the CBC has heat convection inside its enclosed build chamber.
Can you find another low-cost 3D printer with features this good?
Genuine licensed 3D printing software
Creating supports is much easier and more effective than on other printers that use free open-source 3D printing software.- Cuts print setup time by about 70% compared with other software.
- Prints look better because support material is kept as small as possible.
Can you see now how powerful Cubicon really is? Which other low-cost 3D printer comes with genuine licensed software?
>> FDM 3D printers.
Saves material
The machine runs reliably, so print failures are rare. It is clearly ahead of other low-cost 3D printers here.Low material cost
Genuine 3D printing material is quite cheap and 100% made in Korea, so customers can trust the plastic supplied by 3D Vietnam. On top of that, the machine runs so reliably that failed parts are practically nonexistent. This saves you a lot of material compared with other low-cost 3D printers.New features for users
Full touchscreen control
The Cubicon Single Plus will look very stylish in your office.
32-bit mainboard processing
Fast print speed
The print head moves at 500 mm/min, while the typical fast speed on the market today is 300 mm/min.>> Buy this 3D printer now!
Specifications
| Print materials | ABS, PLA, TPU (flexible) |
| Support material | Yes |
| Build volume | 190 x 240 x 200 mm |
| Layer thickness | 0.1 ~ 0.2 mm |
| Machine dimensions | 554 x 795 x 524 mm |
| Machine weight | 24 kg |
| Power requirements | 110V/220V, 60Hz, 2.5A |
| Special requirements | None |
For advice, call 0975 008 728 now
Machine photos
Cubicon Single – beautiful in every line
Cubicon Single Plus – elegant design
Sample prints
For advice, call 0975 008 728 now
For advice, call 0975 008 728 now
For advice, call 0975 008 728 now
For advice, call 0975 008 728 now
For advice, call 0975 008 728 now
For advice, call 0975 008 728 now
For advice, call 0975 008 728 now
For advice, call 0975 008 728 now
For advice, call 0975 008 728 now
For advice, call 0975 008 728 now
Conclusion:
Every 3D printer has its own strengths. But from real-world experience, we are fully confident in the Cubicon Single Plus low-cost 3D printer. Simply put, it works efficiently and delivers good results for our 3D printing service. It is researched, made and assembled 100% in Korea by top 3D printer experts. We feel completely at ease using this low-cost 3D printer:
-
The value we get is higher than the price we paid.
-
Simple to operate.
-
Saves time.
-
Saves material.
-
Prints difficult materials such as ABS and TPU.
-
Safe for your staff’s health.
What about you?
What is still holding you back from picking up the phone and calling us to get one? We know you will look at many other low-cost 3D printers before deciding which one to invest in for your company. As a smart buyer, you will work out the numbers on profit or how much cost you save with each low-cost 3D printer. Rest assured, the Cubicon Single Plus will not lose to any competitor on strong profit or maximum cost savings. I also know you are a caring leader, whether a director, a CEO or a department head. You would not save a small amount of money by buying a 3D printer that harms your employees’ health. Nor would you buy an unstable 3D printer that forces your staff to “stay up late and get up early” to look after it. That decision is entirely yours, right now. Pick up the phone and order the Cubicon Single Plus today!TECHNICAL SUPPORT
Contact information:
| INFORMATION | 3D Vietnams Company – 3D Vietnam |
| Phone | 0975 008 728 |
| Mobile | 0975 008 728 |
| E – mail | contact@ct3dgroup.com |
| Address | 7749 Vo Van Ngan, Ho Chi Minh City. |
Contact CT3D Group
CT3D Group – Professional 3D printing, 3D scanning, design and rapid prototyping services nationwide.
- CT3D Thu Duc – Ho Chi Minh City, Hanoi, Hai Phong: in3d.edu.vn – Hotline 0975 008 728 (Mr. Thai)
- CT3D District 6 – Ho Chi Minh City: 3dmaker.vn – Hotline 038 7798308 (Mr. Phuc)
Frequently asked questions
Who is an entry-level FDM 3D printer for?
Entry-level FDM 3D printers suit schools, beginners, designers who need quick prototypes, and small businesses printing jigs and simple parts. Low material cost and fairly easy operation are the main advantages.
What should I look for in a low-cost 3D printer?
Look at build size, supported materials, whether it has an enclosed chamber and heated bed, how easy the slicing software is, and whether spare parts and long-term technical support are available. A cheap printer that is hard to repair costs more later.
What plastics can an FDM 3D printer print?
The most common are PLA, ABS and PETG. Many machines can also print flexible TPU, ASA, nylon or fiber-filled plastics, depending on the nozzle setup and bed temperature. Check the machine specs before using engineering materials.
What does it cost to run an FDM 3D printer?
The main costs are filament, electricity and wear parts such as nozzles, bed surfaces and belts. You should also count operator time and the cost of failed prints while you get used to the machine.
Where can I get 3D printing done without buying a printer?
You can send your STL file to a 3D printing service shop and have it printed on demand. This works well when you print only occasionally or need a technology or material that entry-level printers can’t handle.
Related services at CT3D Group
- On-demand 3D printing service
- High-accuracy 3D scanning service
- Custom 3D design service
- CT3D Group network: ct3dgroup.com · in3d.edu.vn – Hotline/Zalo 0975 008 728
